Skip to main content ↑ ↓
Topic: My car...a couple of new pics. (Read 31381 times) previous topic - next topic

My car...a couple of new pics.

Reply #195 –
thos 17x9 Cobra R's fit with out rubing and what size tires do u have on them?
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

My car...a couple of new pics.

Reply #196 –
Quote from: 50tbrd88;271132
Hey thanks!  I was going to try that this weekend...I found some info over on corral about it last night.  I think you are right I should start there 1st.


It usually works to cure idle problems, at least for me. Hopefully it works for you.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.
 

My car...a couple of new pics.

Reply #197 –
Quote from: hellsing73;271163
thos 17x9 Cobra R's fit with out rubing and what size tires do u have on them?


245/45/17.  No rubbing issues at all.  I intend to run wider rear tires at some point...

Quote
It usually works to cure idle problems, at least for me. Hopefully it works for you.


We shall see!  I need to wrap up some issues on the car this weekend and change the oil now that it has some miles on it.  I also need to retighten the header bolts.

Went to the exhaust shop yesterday to get the lers and tail pipes put on.  The thought never crossed my mind that the shop would not be able to bend some 2.5" tailpipes up from me.  They said their bender could not handle a bend that tight (going over axle).  So now it looks like I am going to order some sort of catback kit for a Mustang and then have the tailpipes extended.  Problem is the ones I can find are expensive.  However, I don't want to sacrifice quality or good sound so I may have to just spend it and go on with my life.

Here are the ones I am considering:

Pypes Violator (have Violator lers on my 'Stang and love 'em)
Dynomax
I am not too excited about the price involved here (plus the fact they tack on $18 shipping).  I need to get something done quick if I am going to possibly take this baby on the Power Tour.  What are your guys thoughts?
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

My car...a couple of new pics.

Reply #198 –
ok thank u
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

My car...a couple of new pics.

Reply #199 –
i have 245 40 17's up front with plenty of room,and 255 40 17's out back and they clear the quad shocks easily.No spacers.Bolt 'em on and go.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

My car...a couple of new pics.

Reply #200 –
just bit the bullet and ordered the Pypes kit.  I have to quit throwing $$$ at this freaking car.  At least it should sound mean now!
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

My car...a couple of new pics.

Reply #201 –
Quote from: vinnietbird;271322
i have 245 40 17's up front with plenty of room,and 255 40 17's out back and they clear the quad shocks easily.No spacers.Bolt 'em on and go.

ok cool thank u
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

My car...a couple of new pics.

Reply #202 –
Just got done putting on the Pypes Violator lers and midpipes.  I am taking the car to get the trans flushed tomorrow so I wanted to get some lers on it.  I left the tailpipes off because I am going to have to take it to the exhaust shop to get everything tweaked into place, welded up, and the tails lengthened.  For the meantime it has old clothes hangers holding things in place :hick:.

First impressions are that the lers really don't le much at all :evilgrin:.  I didn't think I wanted the car very loud, but I think I am going to have to get over that pretty quick.  It should sound even better with the tailpipes on it.

EDIT:  I forgot to mention...I hope I NEVER again have to hang exhaust on a car while laying on a cold, damp garage floor.  I have TOTAL RESPECT for guys at exhaust shops now.  It was not a very fun job trying to wrestle all that  around 4" from your face!!


'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

My car...a couple of new pics.

Reply #203 –
Here's a video
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

My car...a couple of new pics.

Reply #204 –
man that sound nice to me. and where did u get the tech for it?
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

My car...a couple of new pics.

Reply #205 –
The TACH is a Stewart-Warner got it out of Summit racing a couple of years ago.
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

My car...a couple of new pics.

Reply #206 –
ok do u remeber how much it was
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

My car...a couple of new pics.

Reply #207 –
sorry not a clue.
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

My car...a couple of new pics.

Reply #208 –
how did u wire it up?
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

My car...a couple of new pics.

Reply #209 –
Sound good. Are you going to get another vid once its down and out? I am trying to figure out what I want to replace my Flows with. Once you get those tailpipes on it will quite down.
1986 Cougar LS