Skip to main content ↑ ↓
Topic: Springs,... Who Has What with Pix (Read 32023 times) previous topic - next topic

Springs... Who Has What with Pix

Reply #75 –
Quote from: Chuck W;104377
Everything but the front sway bar and the rear shocks will bolt up....

Will it work?  Dunno.  Perhaps.



Just out of curiosity.... what is it about the bullit front swaybar that it wouldn't work? Is it because of different bends for the mod motors?
Resident "Idiot".

Formerly TBob5pt0 :shoothead


Quote from: JeremyB;165772
Repairing a lock cylinder that is frozen or sans keys requires a drill, gumption, and a midget on a tricycle.
Quote from: Big_D
Forgot to put on intake hose when starting the car, sucked neighbors cat into intake.

Springs... Who Has What with Pix

Reply #76 –
After you lower the front,do you need a new front end alignment?Lowering is one thing on these cars I've never attempted.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Springs... Who Has What with Pix

Reply #77 –
Probably,I doubt you could put the strut back exactly where it belongs.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Springs... Who Has What with Pix

Reply #78 –
Quote from: Warbird9;139830
Just out of curiosity.... what is it about the bullit front swaybar that it wouldn't work? Is it because of different bends for the mod motors?

Yep, the bends are different.
2005 Subaru WRX STi|daily driver

Springs... Who Has What with Pix

Reply #79 –
I dont like to complain about things but.

:ttiwwp:

Is there any way to get the pics fixed. It kind of defeats the purpose of the thread when there are no pics to use as a reference when choosing springs.

Im done whining now.:flame:

Springs... Who Has What with Pix

Reply #80 –
Your are correct.I have before I will put after later.
once I figure why mine raised.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Springs... Who Has What with Pix

Reply #81 –
It could be because the old springs had sagged and it will settle lower than it is now after some time.

Springs... Who Has What with Pix

Reply #82 –
If it did sag I hate to see how high it was new.It had to be out of perportion.Just like my motor I do everything at once.I don't get to see the little things as you go along.It dropped a little since I did it,no matter it goes sat. to get alighned.I just want to run it before the next project.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Springs... Who Has What with Pix

Reply #83 –
Quote from: Ether947;140510
Yep, the bends are different.


Thanks for the info Ether!  Um...... anyone need a Bullit front swaybar?:hick:  LOL!
Resident "Idiot".

Formerly TBob5pt0 :shoothead


Quote from: JeremyB;165772
Repairing a lock cylinder that is frozen or sans keys requires a drill, gumption, and a midget on a tricycle.
Quote from: Big_D
Forgot to put on intake hose when starting the car, sucked neighbors cat into intake.