Skip to main content ↑ ↓
Topic: Wiring msd 6a and coil to TC help. (Read 1073 times) previous topic - next topic

Wiring msd 6a and coil to TC help.

Hey guys can you help me out wire a msd 6a box and blaster 2 coil to my TurboCoupe? I know that the coil gets connected to the box and I need to find a wire with the ignition but do I connect the wires that go to the dissy? Also what harness do i need to make the stock tach work thanks guys lmk if I missed anything. thanks
[SIGPIC][/SIGPIC]
87 T-Bird turbo'd and supercharged and if things call for it juiced. :evilgrin:
88 Turbocoupe t3, 4.10's, Daily driver

Re: Wiring msd 6a and coil to TC help.

Reply #1 –
Also guys while I order the harness i need to make the tach work how do I wire the coil alone, using the same wires the stock coil is using? thanks guys lmk
[SIGPIC][/SIGPIC]
87 T-Bird turbo'd and supercharged and if things call for it juiced. :evilgrin:
88 Turbocoupe t3, 4.10's, Daily driver

Re: Wiring msd 6a and coil to TC help.

Reply #2 –
are you still running EFI with the TFI distributor?

this coil is not a good choice..

if your still useing the stock style EFI setup you need this coil..


here is the links you need

http://www.msdignition.com/downld1.htm

http://www.msdignition.com/pdf/6%20series/6series.pdf

oh and if you wire the MSD they way they tell you. the factory tach will work.. with no modifcations at all

Nick
Quote
there's only about a half a dozen man made objects that are herd by the human ear below 40Hz,a pipe organ,thunder,the space shuttle lifting off,a jet airplane taking off or landing,a large canon,an atomic bomb ignited in your back yard and the heat wave afterward oh wait you would be dead so you would'nt hear it scratch that!,and maybe beating your hear against a wall less then 40 times a second..rap music is'nt one of them!thats 40-60Hz@100+db the moving air is under 40Hz