Skip to main content ↑ ↓
Topic: O.K., the sequential deal..... (Read 2688 times) previous topic - next topic

O.K., the sequential deal.....

Reply #15 –
Dont know but my state may have gaven a weaver. I thought about that but as they say you cant fight city hall
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

O.K., the sequential deal.....

Reply #16 –
I also heard they were illegal here to.... and I have never seen a stang with sequential lights here either. or any car for that matter, except the old 60s, and 70s Cougars
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

O.K., the sequential deal.....

Reply #17 –
just got the scoop on the lights in NY

The controller needs to have a D.O.T. number on them to pass inspection, and be distinguishable from the brake lights after installation..

that info came from a NYS inspector
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

O.K., the sequential deal.....

Reply #18 –
You know they are so dam cool i am going to mess with a set i have from a cougar i had to remove for state inspection. My local cops informed me they cant enforce the regulation as some cougars came from the factory like this. Now where the hell did i put them??? The Midnighter will get the modules and sequential MOD!!! SCREW the COPS!!!
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

O.K., the sequential deal.....

Reply #19 –
Would there be a way to wire in a switch of sorts, so to be able to disable the sequencing ability when not wanted? As in when the fuzz is on your ass and you're intending to turn, lol.
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

O.K., the sequential deal.....

Reply #20 –
If there is a bypass on them, I will put them in my 87. they would also need to be bypassed for yearly inspection too
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1
 

O.K., the sequential deal.....

Reply #21 –
These kits are really good. Had one on my 2000 GT and never had a problem with it.

O.K., the sequential deal.....

Reply #22 –
I will have to see how they are set up. It has been years since i messed with them???
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

O.K., the sequential deal.....

Reply #23 –
I have a kit in mine and have had the car inspected atleast two times. I'm in upstate NY.
:ford::oldcougar::mercury:

O.K., the sequential deal.....

Reply #24 –
Quote from: cougar1car;397181
I have a kit in mine and have had the car inspected atleast two times. I'm in upstate NY.

then they didn't really inspect it..
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

O.K., the sequential deal.....

Reply #25 –
Jerry, go to this link        http://www.webelectricproducts.com/


and read "Question?". It'll have your answers I believe.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

O.K., the sequential deal.....

Reply #27 –
I'll give it a month to come up with a minimum of 10 people. If not, then at least I tried. I already have my kit. I paid full price, but I got it. I just knew many people are always asking about sequentials, and here is their chance at the cheapest price that I have seen.

I'll make a post when the deadline for me to do this is to see who's on board or not.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

O.K., the sequential deal.....

Reply #28 –
Vinnie, I didn't really see an answer..
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

O.K., the sequential deal.....

Reply #29 –
Tell ya what Vman, hang onto the payment you were going to send for the harness for Jerry....if you get the other 9 or so folks in the buy, then use that against my part, and I'll paypal the difference to you...if it falls through on the deadline, then send me the payment at that time? I've got a little bit of money here and I'm working, so no issues whatsoever on my end...either way, I'm in on the lights if the other people DO or DO not go in...I want a set too. :)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)