The coupe now runs! UPDATED April 02, 2010, 07:32:10 PM Finally got this thing to idle right, so I thought I'd shoot a vid of it. Far from complete, but it runs and drives. I've been busting my ass the past week to get it inspected legally. Just need some good tires and an alignment now.http://www.youtube.com/watch?v=Yu4JJAsfLjQ Quote Selected
The coupe now runs! UPDATED Reply #1 – April 02, 2010, 07:38:41 PM Congrats on getting it running! That little car should move right out with the 351 and big cam. What gears are you running and do you have posi in it yet?What was the problem with the idle and how did you fix it?I used to have an 81 Hatchback with the same color orange. It was a straight six car and very gutless. The body just kind of fell apart but that engine just kept on running.TED Quote Selected
The coupe now runs! UPDATED Reply #2 – April 02, 2010, 07:50:30 PM it has a 8.8 from a GT. Gears I guess are 3.08's, but I have 3.55's I'll be swapping in. the idle issue was the throttle cable length. I had to make the ball stud it snaps onto "adjustable". Plus, the thing had 65 primary jets and 87 jets in the back. It would just flood out if I got into the secondaries. I put in 72's in place of the 87's and replaced the power valve plug with a 6.5HG valve. Quote Selected
The coupe now runs! UPDATED Reply #3 – April 03, 2010, 07:30:44 PM I almost shiznit myself. Quote Selected
The coupe now runs! UPDATED Reply #4 – April 06, 2010, 10:07:37 AM a cam swap is in order to to the current cam being too big for the stock rockers. That's why you hear the tapping in the video. I'll be getting this cam from Summit real soon:http://www.summitracing.com/parts/LUN-00111LK/ Quote Selected
The coupe now runs! UPDATED Reply #5 – April 13, 2010, 06:20:25 PM Quote from: 32VFoxBird;317218a cam swap is in order to to the current cam being too big for the stock rockers. That's why you hear the tapping in the video. I'll be getting this cam from Summit real soon:http://www.summitracing.com/parts/LUN-00111LK/I was going to say. Man your valve train sounds clicky. Good deal on the inspection. I am still trying to get my cat inspectorated. Quote Selected
The coupe now runs! UPDATED Reply #6 – April 26, 2010, 08:23:04 PM New vid with new cam. Crane energizer 130062 (similar to a "F" cam)http://www.youtube.com/watch?v=mdgeUcX3ywA Quote Selected
Topic: The coupe now runs! UPDATED (Read 1282 times)
previous topic - next topic
