Skip to main content ↑ ↓
Topic: got my lip spoiler on (Read 6236 times) previous topic - next topic

got my lip spoiler on

Reply #30 –
Nice job. Can you post some more pics (close-ups)? I'm interested in how close the contour fits with the existing body lines, especially where you had to cut it at the wheel opening.
Thanks,
Rick
[SIGPIC][/SIGPIC]
1988 T/C body with a 5.0 transplant. Motor has a Vortech V-2 supercharger, Edlebrock Performer RPM II intake, heads, FRPP F-303 cam, Comp Cams roller rockers, Power Pipe, LMAF, full Mac exhaust, lowered, Koni's, 5 lug conversion, Cobra wheels, 13" Cobra brakes, etc.
SOLD September 2020. Will miss this car after 19 years of building/driving/showing it off. Time for a new chapter in my life.
Dynoed 446 horse/409 torque at the wheels.
2003 Tenth Anniversary Cobra Convertible. 1 of 369 Torch Red made.
2021 Chevrolet 3500 dually, crew cab Duramax.

got my lip spoiler on

Reply #31 –
Quote from: fordguy545;230941
I got mine off ebay. Its for an 01 mustang mach 1
Thanks for the compliments guys. You'd never guess its around a 330whp 4 cylinder, rofl
splitting hairs but the mach 1s were 03-04.
 
you could be close to the 300 hp mark but id bet anything your car wouldnt put down more than 270 to the ground (WHP) given your new times posted in the race section nevermind the ones in your sig. effing nice tcoupe though.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

got my lip spoiler on

Reply #32 –
Am I the only one that doesn't like a chin spoiler on our cars?  The lines follow so nicely all around the car (rear bumer cover, to rocker panels to fenders) and then suddenly the front lines don't match up...  like a car with only the front bumper cover portion of a ground fx kit on.  Speaking strictly appearance, I'm not a fan.....  ??
1988 Thunderbird Turbo Coupe
'89 5.0 w/ ported intakes, Mallory Adjustable FPR, BBK shorties and H with 2.5" Flows, 130 amp 3G, 89 Mustang comp/wiring, Aluminum radiator w/ elec fan, T5 trans, King Cobra clutch, 3.55 gears, 13" Cobra brakes (front), Wilwood prop valve, Mustang A-arms, Front Coil-overs, MM CC plates, Silver 17x9 R's, 03 Cobra IRS, Aluminum DS, 2002 Mustang dash/console etc..., custom leather seats

got my lip spoiler on

Reply #33 –
Quote from: booksix;233994
Am I the only one .....  ??


yup :flip:
gumby - beauty may fade, but stupid is forever!

got my lip spoiler on

Reply #34 –
Quote from: booksix;233994
Am I the only one that doesn't like a chin spoiler on our cars? 

yes:flame:

Quote from: shame302;233978
splitting hairs but the mach 1s were 03-04.
 
you could be close to the 300 hp mark but id bet anything your car wouldnt put down more than 270 to the ground (WHP) given your new times posted in the race section nevermind the ones in your sig. effing nice tcoupe though.


Well, what weight are you using to come up with your hp #'s?  My car weighed right at 3500# without me in it, so add another 190#.  I used the internet calculators because I do trust them.  I used them with the times and speed with my truck, and then went to a dyno day, and it was within 10 or 20hp.  It would be making more power if I would ever get around to putting subframe connectors on it cause I dont want to twist it:mad:

88 t-bird tc - 14.97 @ 90  IHI 18 psi + k+n filter...so far - NOW HX-35 @25psi - 12.75@112    348rwhp/395rwtq
78 F-150 - 11.61@120 on 175shot N20 - 12.55@110 on motor - 5200# race weight:hick:

got my lip spoiler on

Reply #35 –
Quote from: gtbird;233977
Nice job. Can you post some more pics (close-ups)? I'm interested in how close the contour fits with the existing body lines, especially where you had to cut it at the wheel opening.
Thanks,
Rick


I took pictures of it today, so I will probably post up pics tomorrow

88 t-bird tc - 14.97 @ 90  IHI 18 psi + k+n filter...so far - NOW HX-35 @25psi - 12.75@112    348rwhp/395rwtq
78 F-150 - 11.61@120 on 175shot N20 - 12.55@110 on motor - 5200# race weight:hick:

got my lip spoiler on

Reply #36 –
well, i weighed my car at the track...3500ish with me in it. im 185-190ish. 1/4 tank of gas, no spare. stock engine is 320 crank hp, maybe 10-20 more with mods if im lucky. 13.4 with a trap speed of 106.94, call it 107. my car might put down 290 hp to the ground if im lucky. real world times, not internet guesstamates. this may, or may not apply to your car and times, just my personal experiance and criteria for estimating yours.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

got my lip spoiler on

Reply #37 –
^I dunno, but according to my megasquirt, its using 63% of my 85# injectors.  Anyways here are the close up pics




88 t-bird tc - 14.97 @ 90  IHI 18 psi + k+n filter...so far - NOW HX-35 @25psi - 12.75@112    348rwhp/395rwtq
78 F-150 - 11.61@120 on 175shot N20 - 12.55@110 on motor - 5200# race weight:hick:

got my lip spoiler on

Reply #38 –
Quote
I dunno, but according to my megasquirt, its using 63% of my 85# injectors


@ what pressure and BFSC?
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

got my lip spoiler on

Reply #39 –
I can't wait til I get the Sport fixed,painted and ready for my spoiler,trim pieces,windows,etc.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

got my lip spoiler on

Reply #40 –
I hear ya.  I've had NO time to work on my Chin spoiler..... I need about 6 hours total I'm guessing and I would like to do it all at once what with the cutting and notching for the standard front-end.....

The wife has other plans.....
Her -----> :nutkick: <----- my projects

I'll be doing something with a different set of valve covers shortly as well.

Might I add those Snowflakes make the car the way they are done! ;)
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

got my lip spoiler on

Reply #41 –
Parts I have,lots of them.Time.....not much at al.I need to fix the engine problem now (I'm guessing a bad valve).
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

got my lip spoiler on

Reply #42 –
Quote from: V8Demon;234246
@ what pressure and BFSC?


Its at 22 psi on my holset, and it pulls way harder than it did at 20.  I cant wait to find out how hard it pulls at 28/30 psi.  Base fuel pressure is 38/39psi, but am not exactly sure what bfsc is referring to

V8demon, I put this on in about 45 minutes total.  I did most of it during lunch at work, and then finished it later that evening

88 t-bird tc - 14.97 @ 90  IHI 18 psi + k+n filter...so far - NOW HX-35 @25psi - 12.75@112    348rwhp/395rwtq
78 F-150 - 11.61@120 on 175shot N20 - 12.55@110 on motor - 5200# race weight:hick:

got my lip spoiler on

Reply #43 –
it looks great! nice job.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~
 

got my lip spoiler on

Reply #44 –
so-who put one on their XR7 so far?