Skip to main content ↑ ↓
Topic: New Gears (Read 1773 times) previous topic - next topic

New Gears

Whoa what a difference !!!!!! put my new gears in Friday(3.73) can't believe i didn't do this a long time ago. take off and the way this thing pics up now is unreal. Now if i can just keep my foot out of it i might be able to keep gas in her.:burnout:
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

New Gears

Reply #1 –
Yeah, once you've run 3.73s, you've reached manhood...

Sorta like a :shakeass: compared to your palm...
 

New Gears

Reply #2 –
Did you come from 2.73's?
93 Festiva L, 193k miles, BP+T/G25MR swap, T3 50trim .48/.42, SRT FMIC, Capri electronics/Rocketchip, 2.5" exhaust
bests: ET 12.86, MPH 110.25, 1.92 short
02 Subaru Impreza WRX, 129k miles
97 Subaru Impreza Outback Sport, 236k miles

New Gears

Reply #3 –
Yeah the 3.73s are nice if you had 2.73 before what where your old gears???
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

New Gears

Reply #4 –
Gears really are one of the best mods for the money. I could tell a big difference when I went from 3.08s to 3.55s in my bird. If I had it to do over again I would have went to 3.73 or 3.90.
Matt
1984 Thunderbird - 89 302 HO, GT40 heads w/ Trick Flow springs, E303 cam, Edelbrock Performer 289 intake and 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax lers, Mustang AOD and shifter, Mustang 8.8 w/ 3.73s, 3G alternator, Mustang front and rear sway bars, KYB SN-95 front struts and shocks, and 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter w/ Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax lers, 3G alternator, aluminum radiator, and 3.27 gears.
 
1986 Cougar 5.0, 1989 Mark VII LSC 5 speed, 1980 Mercury Zephyr 4 door (sold)

New Gears

Reply #5 –
GAHH cant wait to get mine in I'm doin 373s too. I got a buddy and he told me a few months ago a friend of his dad's (who did the rear end on their built-up '72 LeMans) would be happy to do it for me. I gotta rattle his cage and see if the guy definitely will be available and when.
 
I can't even imagine...all I know is I'm probably gonna have to get some self-control. Anyone know where they sell that stuff I can't seem to find it? :evilgrin:
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

New Gears

Reply #6 –
Oh yeah, gears REALLY wake these cars up.  I just had some fun through some mountain roads today...wooo that was fun!

New Gears

Reply #7 –
Yea guy's, I came from 2.73's and the difference is like WOW!!
The only thing is i now want even MORE POWER!!, which i'm planning on doing anyway, trick flow heads, cam, supercharger.
  my wife says "your gonna get in trouble with that thing" and i say"naw, just gonna have some fun!!"
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

New Gears

Reply #8 –
Quote from: flipnbird;206366
Yea guy's, I came from 2.73's and the difference is like WOW!!
The only thing is i now want even MORE POWER!!, which i'm planning on doing anyway, trick flow heads, cam, supercharger.
  my wife says "your gonna get in trouble with that thing" and i say"naw, just gonna have some fun!!"


Once you do that and I get my new engine done, we gotta go up to Farmington and show em how us Fox Tbird guys do it :D

New Gears

Reply #9 –
Stick a 2400 stall converter in it, the difference will be just as great as the 3.73s(assuming you can find traction which is going to require sticky tires)...

New Gears

Reply #10 –
Quote from: TurboCoupe50;206434
Stick a 2400 stall converter in it, the difference will be just as great as the 3.73s(assuming you can find traction which is going to require sticky tires)...


Yeah I still need to get one to go with my 3.73s :D
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

New Gears

Reply #11 –
i had 2.73's swapped to 3.73s into my T-bird.

My dads 69 mustang had stock i think 3.08s or so swapped to 3.55s and then 3.90s now the car takes off really quick.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

New Gears

Reply #12 –
I have 4:30's to put into my car, :evilgrin:  but then again, 4.6s like to rev.


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

New Gears

Reply #13 –
Gear multiplication rules......:burnout:
88 TC with 93 GT 5.0 (.030 over), XE266HR Compcam, SVO 1.6 Roller Rockers, BBK underdrives, BBK 1 5/8" headers, 2 1/2" exhuast with Americian Thunder Flowmaster lers. Tremec 5 speed and 3.73's and alot of other goodies to list.....

New Gears

Reply #14 –
i cant wait till i get time off work to put my 4:10 gears in mine.
84 el camino ss-daily driver(efi mild sbc,2004r, posi 3:42 rear.)
84 mercury cougar v6- was a v6/ nitrous drag car, going back to mostly stock
81 chevy malibu-protouring/  drag car.( efi sbc supercharged 283 that will rev to the moon, 2004r, 4:11 posi rear)