Making some progress- FOR SALE Reply #195 – November 12, 2008, 10:04:20 PM Jim what shop is doing the tuning? Quote Selected
Making some progress- FOR SALE Reply #196 – November 12, 2008, 10:06:52 PM I'm going up to PSI Motorsports. Quote Selected
Making some progress- FOR SALE Reply #197 – November 13, 2008, 12:28:14 AM Thats about 75 miles from me, let me know how you like them. I'm looking to get a tune when I finally get done. How about some pics of your progress Quote Selected
Making some progress- FOR SALE Reply #198 – November 13, 2008, 03:35:49 AM I've heard good things about them. plus there close to me. Quote Selected
Making some progress- FOR SALE Reply #199 – November 13, 2008, 07:53:20 PM Quote from: Kitz Kat;242852I've heard good things about them. plus there close to me.They seemed like a decent shop. We will see. I spent about an hour there talking with them about my car...what needed to be done before, what they would be doing and weak spots in my car. I can't wait. Quote Selected
Making some progress- FOR SALE Reply #200 – November 13, 2008, 11:04:07 PM cool man, I'm glad you see the light at the end of the tunnel! its crazy how long this stuff takes to do. When did you start this project? Just curious because I'm about 8 months in and have lots to do still. Quote Selected
Making some progress- FOR SALE Reply #201 – November 14, 2008, 04:29:11 PM Quote from: Bob;242997cool man, I'm glad you see the light at the end of the tunnel! its crazy how long this stuff takes to do. When did you start this project? Just curious because I'm about 8 months in and have lots to do still.I don't think that I want to look back and see when I started. It may make me sick. Quote Selected
Making some progress- FOR SALE Reply #202 – November 16, 2008, 10:05:46 AM That's how I feel after 18 months. Quote Selected
Making some progress- FOR SALE Reply #203 – November 17, 2008, 05:34:02 PM It's been 9 months since I first bought the 5.0 engine being used for my 270rwhp project! Gotta love the money bottleneck haha. Quote Selected
Making some progress- FOR SALE Reply #204 – November 17, 2008, 06:10:36 PM Quote from: kingcars;243472It's been 9 months since I first bought the 5.0 engine being used for my 270rwhp project! Gotta love the money bottleneck haha.Ain't that the truth! If it wasn't for money I might be done by now! :hick: Quote Selected
Making some progress- FOR SALE Reply #205 – November 26, 2008, 07:03:40 PM Bad day at the dyno......Started off with the car having some blow by out of the valve cover. He asked if I wanted to continue on and I said that I wanted to get a base tune in it. We were getting really good power, cutting it out around 3400rpm. We wrapped to breather to keep the oil from dripping on the header. It wasn't getting any worse so we made a partial full pull: 474hp@5400rpm, 464tq@5150rpm. That was without any timing pulled out and no methanol injection. With the ability to tune the top end more, we could have made approx 520 to the wheels. I am guessing there is a ring/piston problem. I'm not sure what I am going to do. I may park it and tear it down or I may put the front end on it, plumb a catch can and drive it until it breaks. Quote Selected
Making some progress- FOR SALE Reply #206 – November 26, 2008, 07:12:55 PM ALL,! the time you spent on it, I would run it till you broke it.You maxed an old block, so now no cat jam again this year!!I really feel for you, I know what your trying to do. Quote Selected
Making some progress- FOR SALE Reply #207 – November 26, 2008, 09:16:03 PM Jim- a lot of mustang guys talk about this on the forums all the time. A lot of people run a breather on each valve cover. I do this plus a little breather on the pcv valve(Turbo coupe valve). When I had one breather on only one valve cover and the pcv blocked off my breather would drip when I stayed in the boost (about 8 lbs.) but that would be the only time it did that. PCV probems/issues are discussed a lot on different mustang forums-I'm sure you've done your homework because your car has come out really nice. I just wanted to tell you my personal experience-now with all the time you've had not driving the car I say drive it until it breaks-it probably won't!! Keep posting up pics-I enjoy seeing the progress.Ken Quote Selected
Making some progress- FOR SALE Reply #208 – November 26, 2008, 09:32:44 PM Quote from: kendoo130;244891Jim- a lot of mustang guys talk about this on the forums all the time. A lot of people run a breather on each valve cover. I do this plus a little breather on the pcv valve(Turbo coupe valve). When I had one breather on only one valve cover and the pcv blocked off my breather would drip when I stayed in the boost (about 8 lbs.) but that would be the only time it did that. PCV probems/issues are discussed a lot on different mustang forums-I'm sure you've done your homework because your car has come out really nice. I just wanted to tell you my personal experience-now with all the time you've had not driving the car I say drive it until it breaks-it probably won't!! Keep posting up pics-I'm enjoy seeing the progress.KenYea, I know that they will drip some. You can put your hand about 3 inches over the opening and actually feel the exhaust pulses blowing out. I'm not sure how long it would stay together at that power either. I am going to check it out a little further this weekend. There may be a sale on engine parts if I don't like what I see. Quote Selected
Topic: Making some progress- FOR SALE (Read 44870 times)
previous topic - next topic
