Skip to main content ↑ ↓
Topic: E-6 Exhaust Manifold (Read 491 times) previous topic - next topic

E-6 Exhaust Manifold

selling a clean crack free E-6 exhaust manifold. On the inside of each tubular member was a 1/4 Inch of metal that actually interfered with the air flow. It was part of the mounting tabs on the outside of the manifold. Anyways i grinned them off to increase airflow. I have cleaned this manifold twice in a solvent tank both inside and out thoroughly.

First $80.00 takes it, plus shipping.
:birdsmily:

2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels
 

E-6 Exhaust Manifold

Reply #1 –
Thats the last of them.
:birdsmily:

2.5" Cat Back Exhaust, CenterForce Stage 2 Dual Friction Clutch, B&M Ripper Shifter, T3/T4 Turbonetics 63 A/R Turbo, Rods Stainless Tubular Ceramic Coated Header, Boost Controller @ 15Psi, Kirban AFPR, 42lb Injectors, 190LPH Walbro Fuel pump, Ranger Roller Cam, 3" Aluminum Intake Tubing, K&N Cone,  KYB Struts, Koni Red Horizontals/Verticals, Eibach Sportline Springs, Racer Walsh C/C Plates, Polyurethane Bushings, 17x9 Cobra R Wheels