Skip to main content ↑ ↓
Topic: Can I use a Stang harness? (Read 1005 times) previous topic - next topic

Can I use a Stang harness?

Could I use a Stang 5.0 harness in my '88 Tbird, if I changed the connectors and repinned the wiring?

If so, I've got one located...
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Can I use a Stang harness?

Reply #1 –
You should be able to. At least I hope so. I'm about to put a 5.o from a 89 Mustang LX with wiring harness if it works. Let me know what happens.

Can I use a Stang harness?

Reply #2 –
Vinnie might chime in on this?
http://www.foxtbirdcougarforums.com/showthread.php?t=15764&highlight=mass+air+harness
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Can I use a Stang harness?

Reply #3 –
I have the engine harness out of an 88 mustang 5.0.. Its bulkhead connectors are the same as the 88 Tbird.  There are other differences though.
One 88
 

Can I use a Stang harness?

Reply #4 –
I tried it,it needed more effort than I was willing to do,so,I found another T-Bird 5.0 harness and ended up good.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..