Ok, I am replacing the brake booster on an '85 TBird V8 and the last top bolt is being a pest. I have remove the plastic panel under the dash to get access but it is extremely difficult to access through the supports placed up there with a ratchet or getting open end wrench ratchet in there. I haven't pulled the brake pedal off since that also looks to be a little bitch too. The last bolt is loose , but just not enough to grab with fingers, let alone getting a hand in there to even touch it. Any suggestions or mechanic pages available on brake booster removal?
Put one of the bottom bolts back in to he
Old the whole thing against the firewall.
Get a set of harbor freight wobbly extensions. They make all the difference in the world.
You mean universals for a socket ratchet wrench. I think I might do that, but I will need to get them for a 1/4in socket ratchet since I can barely get a finger to the bolt.
No, wobble extensions allow for some articulation. Not the same as universals. And pretty sure when i did my booster, i only removed the lower bash pieces and stop light switch.