OK, so I've been looking to do this for a while, but I've been just busy as hell with everything else going on to do this.
Here are the CAD (and pdf) files for my shock brackets. ---------> CWE Shock Brackets (http://www.turbochuck.com/webimages/motor%20Mounts/Shock%20Brackets/)
They are older .dxf/dwg files as well as PDF's for those who just want dimensions.
You need 4 side plates and 2 of everything else for a set.
Could they be improved? Of course. Have at it if you want to.
Do you have a PN for the stud?
I was just using a 1/2"-13 x 1.25" gr8 bolt, but a pressed-in stud would work too. You would just need to size the hole in that plate appropriately for it.
That's really nice of you for posting.
I'm sure it'll help future forum members for a long time. I downloaded, in case I ever find another t-bird.
You're a good man for posting this.
If I can find the files, I'll upload the SFC seat braces also.
I cant seem to be able to download the CAD Files?
Thanks Chuck for uploading the pdf files/drawings too.
Sorry that I missed this...like REALLY missed it. They are OLD AutoCAD files, but people should be able to DL them.
haven't had any issues accessing and downloading the files personally.
what most people need to do is right click the file name>save link as
Never mind, got it all working! Thanks for the right clicking advice and thankyou for the drawings! Currently got them all turned into a solid model ready for machining!
My car isn't near me and also in storage, so I cant do measurements, but the one base has an offset hole. In what way should this plate be orientated?
Sorry. I suck at responding to posts. :hick:
That hole is offset towards the middle of the bracket. (Or down, if you look at it how it's installed)