Print Page - Wiring msd 6a and coil to TC help.

Title: Wiring msd 6a and coil to TC help.
Post by: 88cat on July 10, 2005, 01:37:48 PM

Hey guys can you help me out wire a msd 6a box and blaster 2 coil to my TurboCoupe? I know that the coil gets connected to the box and I need to find a wire with the ignition but do I connect the wires that go to the dissy? Also what harness do i need to make the stock tach work thanks guys lmk if I missed anything. thanks

Title: Re: Wiring msd 6a and coil to TC help.
Post by: 88cat on July 10, 2005, 02:14:08 PM

Also guys while I order the harness i need to make the tach work how do I wire the coil alone, using the same wires the stock coil is using? thanks guys lmk

Title: Re: Wiring msd 6a and coil to TC help.
Post by: Blown306Cougar on July 10, 2005, 04:04:04 PM

are you still running EFI with the TFI distributor?

this coil is not a good choice..(http://www.msdignition.com/images/pn8202-7.jpg)

if your still useing the stock style EFI setup you need this coil.. (http://www.msdignition.com/images/pn8227-7.jpg)

here is the links you need

http://www.msdignition.com/downld1.htm (http://www.msdignition.com/downld1.htm)

http://www.msdignition.com/pdf/6%20series/6series.pdf

oh and if you wire the MSD they way they tell you. the factory tach will work.. with no modifcations at all

Nick

Fox T-Bird/Cougar Forums

General => General Fox T-Bird/Cougar Discussion => Topic started by: 88cat on July 10, 2005, 01:37:48 PM