Print Page - Measurement request

Title: Measurement request
Post by: HAVI on April 15, 2012, 10:36:00 PM

Can anyone measure the T5 from the bellhousing front(block surface) to the center of the hole where the shifter mounts?

Title: Measurement request
Post by: jrad235 on April 16, 2012, 02:08:45 AM

Which T-5? Pre or Post 93?

Title: Measurement request
Post by: Beau on April 16, 2012, 02:25:09 AM

I can possibly get measurement you need tomorrow. My buddy has his stang in my shop now, the T5 is out. It's missing the block plate, and the T5 that was in it is in bad shape, hence why it's out.

I'll get the measurement, less the thickness of the blockplate...IF he left the bellhousing out there....

Oh yeah, this one would be the Fox length T5 and bell ;)

Title: Measurement request
Post by: TOM Renzo on April 16, 2012, 06:18:54 AM

On a 5.0 BELL to the center of a WC 5 SPEEDER it is exactly 25 1/2"

Title: Measurement request
Post by: HAVI on April 16, 2012, 07:17:08 PM

Thanks! (pre-93)

Fox T-Bird/Cougar Forums

Technical => Drivetrain Tech => Topic started by: HAVI on April 15, 2012, 10:36:00 PM