Text only | Text with Images

Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars FOR SALE => Topic started by: 93stangfutr2.3t on September 19, 2010, 12:12:50 PM

Title: Misc 2.3t stock engine parts
Post by: 93stangfutr2.3t on September 19, 2010, 12:12:50 PM
I have an assortment of engine parts

1. 85 power steering pump $25 plus shipping
2. HY35 Exhaust housing with V band exhaust  and compressor housings $50 Shipped
3. Oil cooler $25 plus shipping
4. Turbo head ready to go with cam used on my old engine. $75 plus shipping
5. 2.3t Crank $50 plus shipping
6. 2.3t Block $50 pick up only
7. Stock Upper and lower intake $50 shipped
8. Stock Fuel Rail $40 Shipped
9. Stock FPR $15 shipped.
10. Roller cam with with rollers $60 shipped
That's it for now if you want pix I will get them to you.
Title: Misc 2.3t stock engine parts
Post by: lakenheath24 on September 19, 2010, 02:25:16 PM
i'll take the head if you can guarantee it isnt cracked.
Title: Misc 2.3t stock engine parts
Post by: 93stangfutr2.3t on September 19, 2010, 11:50:07 PM
It hasn't been magnafluxed but I literally just pulled it like 2 weeks ago when I had my old engine in my car had to pull it cause the bearings in the bottom end were toast. I can't see any cracks but other than that I have no clue.
Title: Misc 2.3t stock engine parts
Post by: jangus on September 20, 2010, 12:47:00 AM
Most machine shops can magnaflux the head fairly cheaply. Mine charges me $25 to mag the combustion chambers/valve seats/ and bowls.
Title: Misc 2.3t stock engine parts
Post by: Cougar8775 on September 20, 2010, 07:36:27 AM
how many miles were on that roller cam before you pulled it? Also is it out of a ranger?
Title: Misc 2.3t stock engine parts
Post by: lakenheath24 on September 20, 2010, 09:24:35 AM
My machinist thought mine was good too, he spent 3 hours porting the intakes, THEN found a big crack.
Title: Misc 2.3t stock engine parts
Post by: 93stangfutr2.3t on September 20, 2010, 11:56:17 AM
Quote from: Cougar8775;336124
how many miles were on that roller cam before you pulled it? Also is it out of a ranger?


I have no idea on the mileage it doesn't have any grooves in it and yes it was from a ranger.

Quote from: lakenheath24;336132
My machinist thought mine was good too, he spent 3 hours porting the intakes, THEN found a big crack.


That's why mine is only $75 if I mangafluxed it and there weren't any cracks the price would probably go up to $125 Cause I know how hard it is to find a none cracked one but right now I'm just trying to get rid of the stuff.
Title: Misc 2.3t stock engine parts
Post by: lakenheath24 on September 20, 2010, 02:51:05 PM
$75 is an awful lot for what could be a door stop.  I will pass.
Title: Misc 2.3t stock engine parts
Post by: Cougar8775 on September 20, 2010, 03:20:42 PM
let me see if my budget lets me get the cam.
Title: Misc 2.3t stock engine parts
Post by: 93stangfutr2.3t on September 21, 2010, 06:14:14 PM
Ok cougar just let me know.
Title: Misc 2.3t stock engine parts
Post by: 93stangfutr2.3t on October 06, 2010, 07:55:06 PM
Bump
Title: Misc 2.3t stock engine parts
Post by: 93stangfutr2.3t on November 05, 2010, 03:07:24 AM
bump
Title: Misc 2.3t stock engine parts
Post by: 93stangfutr2.3t on November 12, 2010, 05:57:28 PM
Price reductions and updated list.

1. 85 power steering pump $10 plus shipping
4. Turbo head ready to go with cam used on my old engine. $75 plus shipping
5. 2.3t Crank $25 plus shipping
6. 2.3t Block $50 pick up only
7. Stock Upper and lower intake $40 shipped
8. Stock Fuel Rail $30 Shipped (will come with FPR)
10. Roller cam with with rollers $50 shipped
12. Ford Valve cover gasket $20 shipped.
13. 2.3t Distributor top to bottom with TFI pip rotor cap drop in your block good to go. $35 shipped.
Text only | Text with Images