Hello,
Today i was working on my horn wire and found 2 other wires cut clean. Hanging from the wire harness from which the horn wire comes from. One wire was black the other looked to be black and white. I do not see anywhere of where they could go. Just wana make sure they don't go anywhere special that may screw a system up in the car.
Left front fender where header meets fender.
86 TC
Thanks
Dave
Cornering lamp wires. Best I can tell, everything needed for cornering lamps is already in the car except for the lamps and the sockets. They just cut the wires at the factory.
If you look in the same place on the other fender, you'll see two more cut wires.
Shiny Side Up!
Bill
Nope, wrong colors for cornering lamps.
p/y and black for LH
Br/w and black for RH
multipule wires of this exact color scheme are spared back in various places throughout the engine harness as well.
I have not found ref to the shop manuals about these random blk and blk/w wires that are cut. Im up to 500 and some odd pages of shop manual page scans. literally thousands go go.