Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars FOR SALE => Topic started by: polarcat 87 on July 05, 2009, 03:09:10 PM

Title: GT40 intake and other performance parts going carbed
Post by: polarcat 87 on July 05, 2009, 03:09:10 PM
hey guys been a long long time since I have been on here,but I have some parts for sale. As the title says I am going carbed. So here is what I have so far.
 3.55 gears - $50
 BBK cold air intake(filter goes in fender)it has 1 hole drilled where I had my N2O nozzle but it is on the bottum so u can't see it. $75
 24# injectors - $100
 C-L 73mm mass air with sensor and a 24# tube and 30# - $100
 GT 40 upper and lower(lower has been ported) - $350
 93 65mm Cobra throttlebody - $50
 BBK 65mm egr spacer bored to 70mm - $80
 K&N pbuttstuff filter for stock air box $20
 2 mass air computer 1 5spd 1 auto $75 ea.

 Prices do not inclued shipping.  located in Port Clinton,Ohio
Title: GT40 intake and other performance parts going carbed
Post by: Chuck W on July 05, 2009, 06:48:28 PM
Please list full location (city and state) as per the Classified rules.
Title: GT40 intake and other performance parts going carbed
Post by: mcb82gt on July 06, 2009, 04:57:04 PM
Who did the porting on the lower?
Title: GT40 intake and other performance parts going carbed
Post by: polarcat 87 on July 06, 2009, 08:38:26 PM
Ok i figured out why I could not post replys,so mcb82gt like I said in the pm I bought the intake 4yrs ago already ported and I used the felpro 1250 gaskets and they were dead on. The car went 12.59@108mph without the N2O with a 1.78 short time.
 hope this helps.