http://cgi.ebay.com/ebaymotors/TURBO-RS-BOV-BLOW-OFF-VALVE-BOOST-CONTROLLER-30-PSI-WRX_W0QQcmdZViewItemQQcategoryZ33742QQihZ006QQitemZ160267887219QQrdZ1QQsspagenameZWDVW
the controller yes the BOV not for a stock t/c
Why pay the cash when you could make your own controller. Then I tell you to look into a Bypass valve instead. IF setup right the BPV will help you keep the turbo spooled up after shift. I know I told someone on here how to make a MBC for like $15. do some digging on the net that is where I found my info. If you run a BOV on a stock setup when the BOV opens it will let metered air out so you'll have a rich spike and I've heard about idle problems. You do what you want though.
that would have been me. i spent 8 bucks and have it boosted to 15PSI. thing is an animal.
no.
no.way.
If you want boost, just bypass the BCS with a length of vacuum line, more boost faster.
is, by definition, shiznit.
what is a bcs and ive lookked for info to make a boost controler but i haave no luck
That bell outlet on that BOV unscrews and you can stick a threaded piece of pipe on there and make it a BPV.
What quality of stuff do you think you're getting for a whole $18? Seriously.