Text only | Text with Images

Fox T-Bird/Cougar Forums

General => General Fox T-Bird/Cougar Discussion => Topic started by: seanamyers66 on May 24, 2008, 07:41:11 PM

Title: Tail Pipes
Post by: seanamyers66 on May 24, 2008, 07:41:11 PM
Is there a company that makes 21/2" tailpipies for 87-88
Cougars?
Title: Tail Pipes
Post by: SLEEPER T-BIRD 87 on May 24, 2008, 08:09:05 PM
ive got a dynomax 2.5" 87-93 mustang GT tailpipe on my thunderbird
Title: Tail Pipes
Post by: 32VFoxBird on May 24, 2008, 08:59:43 PM
any ler shop should be able to, but i dont think there is any company that has them made aftermarket.
Title: Tail Pipes
Post by: kendoo130 on May 25, 2008, 09:04:03 PM
Just let a good ler shop make em for you-I just got mine done yesterday. The shop charged me $200 from the lers back.
Title: Tail Pipes
Post by: vinnietbird on May 25, 2008, 09:59:14 PM
I ordered mine off of Ebay.They are 2 1/2 inch Stang pipes.I got them new for $50.00 plus twenty something for shipping.The ler shop extended them a few inches and welded my new,wicked awesome,better than anyone else's,tip on.They're great and fit like a glove.
Title: Tail Pipes
Post by: V8Demon on May 25, 2008, 10:19:52 PM
There's a guy by me that actually keeps tail pipes in stock that he makes for Mark VII's.  I'll get his name and # if you wish.
Title: Tail Pipes
Post by: Carpimp1987 on May 26, 2008, 01:10:59 AM
$200  thats not cheap but it looks flawless. any shop should be able to do it and make it look really nice.
Title: Tail Pipes
Post by: Blackout on May 26, 2008, 01:50:42 AM
ummm....

has everyone forgot about http://www.stingerperfromance.com?

2.5 and 3.0 tailpipes for tbirds and cougars.
Title: Tail Pipes
Post by: Cougar5.0 on May 26, 2008, 02:41:28 AM
Quote from: Birdman;220702
ummm....

has everyone forgot about http://www.stingerperfromance.com?

2.5 and 3.0 tailpipes for tbirds and cougars.


, even after I removed the "?" and corrected the misspelling, the link was still dead - better double-check that one!

Ah, here it is http://www.stinger-performance.com/headerparts.html

:D
Title: Tail Pipes
Post by: thunderjet302 on May 28, 2008, 09:28:05 PM
Quote from: kendoo130;220659
Just let a good ler shop make em for you-I just got mine done yesterday. The shop charged me $200 from the lers back.


Are those mandral bent or compression bent? They look good :D

Also are you running 17X9 2003 Cobra's? If so how do they fit in the front?
Title: Tail Pipes
Post by: kendoo130 on May 28, 2008, 10:25:27 PM
Thanks-I dont know how they're bent to tell you the truth. If I remembered about stingers website I would of bought them because they're polished. Yes those are 17x9 Cobra's-I bought them from thundr306. He gave me a small spacer for the front wheels because they were pretty close to the strut without them-even with the spacer they don't pass the fender(I think) I'll take a pic tomorrow in the daytime so you can see.

Ken
Title: Tail Pipes
Post by: kendoo130 on June 02, 2008, 08:47:17 PM
Sorry for the wait-here are some pics of the front wheel. The tires are 245/45/17
Title: Tail Pipes
Post by: daboss351 on June 02, 2008, 09:25:51 PM
Quote from: V8Demon;220671
There's a guy by me that actually keeps tail pipes in stock that he makes for Mark VII's.  I'll get his name and # if you wish.


are you talking about nick??
Title: Tail Pipes
Post by: irv on June 14, 2008, 04:14:38 PM
walker # is the same for a mark or 88 XR7.they are small pipes.
any idea what size your guy makes and if he ships? --irv
Title: Tail Pipes
Post by: V8Demon on June 14, 2008, 06:03:32 PM
Quote from: daboss351;221700
are you talking about nick??



Not sure....can't remember his name.  Got his address around here somewhere...It's an exhaust shop.  The guy does tons of custom work.
Title: Tail Pipes
Post by: daboss351 on June 15, 2008, 12:48:17 AM
nick tanzeni(sp?)
runs an exhaust shop in NY
really good guy
Text only | Text with Images