Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Drivetrain Tech => Topic started by: CatCarMan2012 on February 11, 2008, 03:08:39 PM

Title: Clutch cable routing.
Post by: CatCarMan2012 on February 11, 2008, 03:08:39 PM
Anyone have an image of the clutch cable routing through the engine bay?  Its not immediately clear to me where it goes and they way I have it now its dangerously close to the exhaust.
Title: Clutch cable routing.
Post by: tc² on February 11, 2008, 11:37:29 PM
So it's a V8 car then?  I could show you a pic from my 2.3 but that probably wouldn't help much.

I will say this -- I learned early on that zip ties can fix almost every problem.
Title: Clutch cable routing.
Post by: cougarcragar on February 12, 2008, 12:18:59 AM
Mine had a bracket that bolted down between the strut tower and battery. This kept it away from the engine.
Title: Clutch cable routing.
Post by: CatCarMan2012 on February 13, 2008, 12:24:23 AM
Does the cable route in front of the engine mount?
Title: Clutch cable routing.
Post by: booksix on February 13, 2008, 05:21:46 PM
past the master cylinder, bolts to the side of the engine bay, just in front of the strut tower (i think), down under the motor mount (engine side of mount) and on to the bell housing...
Title: Clutch cable routing.
Post by: CatCarMan2012 on February 13, 2008, 06:20:47 PM
Thanks Six.
Text only | Text with Images